Tail lift , a new lift device which installed at the rear of the truck, vans, etc. It make the driver to load/unload the goods easily and efficiency! Save manpower and time! As it can be used in any time they want, and the power from the batteries, the tail lift is so popular in the Euro country!
This product have...
Anzhong Tail lift is a kind of new logistic device which fixing on the rear of the vehicle. It drive the platform board up and down by the hydraulic pressure power unit to speed up the loading/unloading goods easily. It is easy to control, save time and manpower, safe, high efficiency. So it has been very popular in...
Gasket Seal: Because of different size and standard, please contact us in time. The common materials of gasket seal are rubber, leather, asbestos, cork, PTFE, steel, iron, copper, stainless steel, etc. Size Range: Φ16 mm~Φ3000 mm.
Packing Seal: The materials of packing seal are graphite, PTFE, asbestos, etc. Because of different size and standard, please contact us in time. Size Range: Φ16 mm~Φ3000 mm.
Mechanica Seal: The materials of mechanical seal are graphite, ceramic, slicon carbide, nitrile rubber, nitrile rubber hydride, fluoro carbon rubber, chromium-nickel steel, etc. Because of different size and standard, please contact us in time. Size Range: Φ16 mm~Φ3000 mm.
Wearing Ring: The materials are nitrile rubber, fluoro carbon rubber, cold-roll steel sheet, etc. Specification Range: 16 mm (Outer Diameter) ×6.3 mm (Diameter of Axle) ×7 mm (Width)~330 mm (Outer Diameter) ×300 mm (Diameter of Axle)×22 mm (Width).
Support Ring: The materials are nitrile rubber, fluoro carbon rubber, cold-roll steel sheet, etc. Specification Range: 16 mm (Outer Diameter) ×6.3 mm (Diameter of Axle) ×7 mm (Width)~330 mm (Outer Diameter) ×300 mm (Diameter of Axle)×22 mm (Width).
Wiper Scraper Seal: The materials are nitrile rubber, fluoro carbon rubber, cold-roll steel sheet, etc. Specification Range: 16 mm (Outer Diameter) ×6.3 mm (Diameter of Axle) ×7 mm (Width)~330 mm (Outer Diameter) ×300 mm (Diameter of Axle)×22 mm (Width).
According to different working conditions, hydraulic seals can be divided into piston seal, rod seal and piston and rod seal, the materials are nitrile rubber, fluoro carbon rubber, polyurethane, etc. Specification Range: 18 mm (Outer Diameter) ×8 mm (Diameter of Axle) ×7.5 mm (Width)~332 mm (Outer Diameter) ×330...
According to different working conditions, the materials of oil seal are nitrile rubber, polyacrylate rubber, silicone rubber, fluoro carbon rubber, etc. Specification Range: 6 mm (Diameter of Axle) ×16 mm (Outer Diameter) ×7 mm (Width)~300 mm (Diameter of Axle) ×360 mm (Outer Diameter) ×25 mm (Width).
